SDS5000X серія осцилографів

Обзор
Модели

SDS5000X Series Super Phosphor Oscilloscopes

Product Overview

SIGLENT’s SDS5000X Series Digital Storage Oscilloscopes are available in bandwidths of 1 GHz, 500 MHz, and 350 MHz, have a maximum sample rate of 5 GSa/s, a maximum record length of 250 Mpts/ch, and display up to 4 analog channels + 16 digital channels mixed-signal analysis ability.

The SDS5000X series employs Siglent’s SPO technology with a maximum waveform capture rate of up to 110,000 wfm/s (normal mode, up to 500,000 wfm/s in Sequence mode), 256-level intensity grading display function plus a color temperature display mode. It also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes including serial bus triggering. History waveform recording, Sequence acquisition, Search and Navigate functions allow for extended waveform records to be captured, stored, and analyzed. An impressive array of measurement and math capabilities, options for a 25 MHz arbitrary waveform generator, as well as serial decoding are also features of the SDS5000X.

The large 10.1’’ display capacitive touch screen supports multi-touch gestures, with the addition of a user-friendly one-button design for most commonly used functions, can greatly improve the operation efficiency of the SDS5000X. It also supports mouse and external keyboard control.

Click to view a comparison table of our most powerful scopes.

	Bandwidth	Channels	Real time sampling rate	Capture rate	Memory depth
SDS5034X	350 MHz	4	5 GSa/s (single-channel) , 2.5 GSa/s (dual-channel)	110,000 wfm/s (normal mode), 500,000 wfm/s (sequence mode)	250 Mpts (single-channel), 125 Mpts (dual-channel)
SDS5054X	500 MHz	4	5 GSa/s (single-channel) , 2.5 GSa/s (dual-channel)	110,000 wfm/s (normal mode), 500,000 wfm/s (sequence mode)	250 Mpts (single-channel), 125 Mpts (dual-channel)
SDS5104X	1 GHz	4	5 GSa/s (single-channel) , 2.5 GSa/s (dual-channel)	110,000 wfm/s (normal mode), 500,000 wfm/s (sequence mode)	250 Mpts (single-channel), 125 Mpts (dual-channel)

Key Features

• 1 GHz, 500 MHz, 350 MHz models with real-time sample rate up to 5 GSa/s

• SPO technology

· Waveform capture rates up to 110,000 wfm/s (normal mode), and 500,000 wfm/s (sequence mode)

· Supports 256-level intensity grading and color temperature display modes

· Record length up to 250 Mpts

· Digital trigger system

• Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified and Video (HDTV supported). Trigger zone helps to simplify advanced triggering

• Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and Manchester Code

• Low background noise, supports 0.5 mV/div to 10 V/div voltage scales

• Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 100,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event

• History waveform record (History) function, the maximum recorded waveform length is 100,000 frames

• Automatic measurement function on 50+ parameters, supports statistics with histogram,trend, Gating measurement, Math measurement, History measurement and Ref measurement

• Math function (2 Mpts FFT, addition, subtraction, multiplication, division, integration, differential, square root), supports formula editor

• Abundant data analysis functions such as Search, Navigate, Digital Voltmeter, Counter, Waveform Histogram, Bode plot and Power Analysis

• High Speed hardware-based Average, ERES (Enhanced Resolution)

• High Speed hardware-based Mask Test function, with Mask Editor tool for creating user-defned masks

• 16 digital channels (optional) with sample rate up to 1.25 GSa/s, record length up to 62.5 Mpts

• 25 MHz function / arbitrary waveform generator, built-in multiple predefned waveforms

• Large 10.1” TFT-LCD display with 1024 * 600 resolution; Capacitive touch screen supports multi-touch gestures

• Supports external mouse and keyboard

• 10 types of one-button shortcuts

• Multiple interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11, telnet, socket, web), Pass/Fail, Trigger Out, 10 MHz In, 10 MHz Out, VGA output

• Built-in web server supports remote control by the LAN port using a web browser

• Supports SCPI remote control commands


Up to 110,000 wfm/s waveform update rate With a waveform update rate of up to 110,000 wfm/s, the oscilloscope can easily capture unusual or low-probability events. In Sequence mode the waveform capture rate can reach 500,000 wfm/s	Record Length of up to 250 Mpts/ch Using hardware-based Zoom technique and record length of up to 250 Mpts, users can select a slower timebase without compromising the sample rate, and then quickly zoom in to focus on the area of interest	Multiple Trigger Functions Edge, Slope, Pulse, Video, Windows, Runt, Interval, Dropout, Pattern, Qualifed and serial trigger

256-level Intensity Grading and Color Temperature Display Modes	Trigger Zone Trigger Zone is available for advanced triggering	Measurements of a Variety of Parameters Parameter measurements includes 4 categories: horizontal, vertical, miscellaneous and CH delay providing a total of 50+ different types of measurements. Measurements can be performed within a specified gate period. Measurements on Math, Reference and History frames are supported

Parameter statistics function Statistics shows the current value, maximum value, minimum value, standard deviation and mean value of up to 5 parameters simultaneously. Histogram is available to show the probability distribution of a parameter.Trend is available to show the parameter value vs. time.	Advanced Math Function In addition to the traditional (+, -, X, /) operations, FFT, integration, differential and square root operations are supported. Formula Editor is available for more complex operations, 2 math traces are available.	Hardware accelerated FFT supports up to 2 Mpts operation. This provides high frequency resolution with a fast refresh rate. The FFT function also supports a variety of window functions so that it can adapt to different spectrum measurement needs. Three modes (Normal, Average and Max hold) can satisfy different requirements for observing the power spectrum. Auto peak detection and markers are supported.

History Mode History function can record up to 100,000 frames of waveforms. The recording is executed automatically, so that the customer can play back the history waveforms at any time in order to observe unusual events and quickly locate the area of interest using the cursors or measurements	Sequence Mode Segmented memory collection will store the waveform into multiple memory segments (up to 100,000) and each segment will store a triggered waveform as well the dead time information. The interval between segments can be as small as 2 μs. All of the segments can be played back using the History function	Search and Navigate The SDS5000X can search events specifed by the user in a frame. Events ﬂagged by the Search can be recalled automatically using Navigate. It can also navigate by time (delay position) and history frames

Hardware-based Average and Eres Acquisition Average and ERES (Enhanced Resolution) acquisition modes are hardware-based, allowing the waveforms to be captured at a faster rate	Hardware-based High Speed Mask Test Function The SDS5000X utilizes a hardware-based Mask Test function, performing up to 110,000 Pass / Fail decisions each second. It is easy to generate user-defned test templates in order to provide trace mask comparisons, making it suitable for long-term signal monitoring or automated production line testing	Built-in Mask Editor application helps to create custom masks

Serial Bus Decode Display the decoded characters through the events list. Bus protocol information can be quickly and intuitively displayed in tabular form. I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S and MIL-STD-1553B are supported	Waveform Histogram The Waveform Histogram feature provides a statistics view of the waveform in horizontal and vertical directions	Bode Plot The SDS5000X can control the USB AWG module or a stand-alone SIGLENT SDG generator, to scan the amplitude and phase frequency response of the DUT, and display the data as a Bode Plot. This makes it possible to replace expensive network analyzer in some applications.

Power Analysis (Optional) The Power Analysis option provides a full suite of power measurements and analysis, which greatly improve the measurement efficiency in switching power supplies and power devices design.	Digital Voltmeter Function 4-digit voltmeter and 7-digit frequency counter. Any analog channel can be selected as a source. Bar, Histogram and Trend diagrams are supported.	Web control With the new embedded web server, users can control the oscilloscope from a simple web page. This provides wonderful remote troubleshooting and monitoring capabilities.

Digital Channels / MSO (Optional) Four analog channels plus 16 digital channels enable users to acquire and trigger on the waveforms then analyze the pattern, simultaneously with one instrument	Built -in 25 MHz Function/Arbitrary Waveform Generator (Optional) the SDS5000X can control the SAG1021I USB Function/Arbitrary waveform generator to output waveform with up to 25 MHz frequency and ±3 V amplitude. Six basic waveforms plus multiple types of arbitrary waveforms are built-in	Complete Connectivity USB Host, USB Device (USBTMC), LAN (VXI-11, telnet, socket, web), Pass/Fail, Trigger Out, 10 MHz In/Out and VGA output

Standard Accessories


USB Cable Standard USB cable. Learn more	Power Cord Proper cord for country of operation Learn more	Quick Start Guide-SDS5KX Learn more	SP3050A 350 MHz models: SP3050A Probes 500 MHz / 1 GHz models: SP3050A Probes Learn more

SP2035A Passive probe x4 (4-ch model), SP2035A for 350 MHz models Learn more

Optional Accessories


SPL2016 Logic Probe hardware kit Learn more	SDS-5000X-16LA 16 digital channels (software) Learn more	SAG1021I External Arbitrary Waveform Generator Learn more	SDS-5000X-FG Waveform generator software Learn more

SDS5000X-PA Power Analysis Learn more	DF2001A Power analysis deskew fixture. Learn more	HPB4010 High voltage probe Learn more	SAP1000 1 GHz active probe Learn more

Current Probes Measure current with your oscilloscope Learn more	High Voltage Differential Probe Measure floating circuits/three phase systems Learn more	SDS-5000X-FlexRay FlexRay trigger & decode Learn more	SDS-5000X-CANFD CAN FD trigger & decode Learn more

SDS5000X-SENT Sent trigger & decode (SW) Learn more	SDS5000X-Manch Manchester serial decoding Learn more	SDS5000X-1553B 1553 trigger and decode Learn more	SDS-5000X-I2S I2S trigger & decode Learn more

SDS-5000X-4BW05 350 MHz to 500 MHz bandwidth upgrade (4-ch model) Learn more	SDS-5000X-2BW05 350 MHz to 500 MHz bandwidth upgrade (2-ch model) Learn more	SDS-5000X-4BW10 500 MHz to 1 GHz bandwidth upgrade (4-ch model) Learn more	SDS-5000X-2BW10 500 MHz to 1 GHz bandwidth upgrade (2-ch model) Learn more

STB-3 Oscilloscope Demonstration Board Learn more	BAG-S2 Soft Carry Bag Learn more	LPA10 LeCroy Probe Adapter	TPA10 Tek Probe Adapter Learn more

SDS5000X-RMK SDS5000X Rack mount kit, 19″ 6U high Learn more	PAK1 Probe Accessories Kit. Compatibility: PB470, PP510, PP215, PP430, SP2030A, SP2035A, SP2035 Learn more